Cummins Intake Manifold

There is a wide array of selections for a person when looking for an intake manifold for their Diesel Cummins engine, but no one has a better selection of parts than Banks Power.  So read through this guide for some overview on a couple of Banks’ intake manifolds then checkout the end of the article for website information.

Let’s start with the Banks Power High-Ram Intake Manifold built for the 2005-2007 6.0L Ford Powerstroke; this part will make certain your PowerStroke’s engine is receiving the best airflow from your stock intercooler.  Unlike the stock manifolds that restrict airflow from the intercooler, the High-Ram intake manifold has a larger, more streamlined design ensuring the m0st efficient flow of air.  This system provides a better boost without raising your vehicle’s turbine backpressure.  When tested for efficiency, the High-Ram intake manifold delivered up to 64% in reduction of loss of pressure; in turn leading to an increase of acceleration and an improved fuel economy.  The product is packaged including a 3-1/2″ boost tube with a constant diameter that allows the airflow to pass from the intercooler without any restrictions.

Next up for review is the Banks Power TwinRam Intake Manifold designed for the 1994-1998 5.9L Dodge Cummins with EGR systems.  This products was specially designed to improve your vehicle’s problems with the air intake and internal temperature balance issues.  The TwinRam intake manifold system has a doubled inlet area which helps optimize the distribution of air into the cylinder head and flow the boosted air into all 6 cylinders equally.  This equalization of the air-streams does away with wrong internal temperatures, balances the cylinder air volume and produces a more smooth output.  The TwinRam intake manifold system improves mileage and durability, reduces emissions, and raises the power rating.

The last Banks made intake manifold system we shall review is the Banks Power Monster-Ram Intake Manifold built for the 1998-2002 5.9L Dodge Cummins.  This intake manifold system includes a huge 3 1/2″ boost tube upgrade that will significantly increase your vehicle’s engine airflow.  Designed using the newest electronic computational fluid-dynamic technology, this intake manifold will give you the most power possible.  With 6 ports that can be used for the injection of such things as: nitrous, propane, meth, or water, there is no limit to this system’s expandability of performance.

With such a large selection of varying intake manifolds (and those i didn’t have room to discuss) anyone can find the right product they need.  If you need to do a little more research of your own before you order a Banks intake manifold then be sure to go online at Banks Power Products using the search bar located at the left-hand side of the screen or call at 714-848-2170.

Advertisements

Banks Techni-Cooler

If you’re looking for the most efficient intercooler for your 2008-2010 6.4L Ford Powerstroke charged air system then the best decision to make would be to get the Banks Power Techni-Cooler Intercooler System.  This system is great at increasing your vehicle’s cooling capacity by way of balancing the greater fuel mixture with an improved airflow and a cooler, more dense air.  With denser air comes more oxygen, which will improve the vehicle’s combustion and its engine efficiency.  A list of the system’s benefits follows: a higher power of more than usual at any exhaust gas temperature, a more efficient fuel economy, and lower exhaust gas temperatures.  The Banks Techni-Cooler system provides the maximum reduction in boost air temperature with a low loss of power.

Stock intercooler models are often times too small to be efficient while other aftermarket models are too big and poorly designed.  The Banks Power Techni-Cooler Intercooler System has a streamlined design that was made to capture the critical airflow.  Designed using Computational Fluid Dynamics this intercooler’s rugged cast aluminum end tanks ensure an improved durability and a slicker airflow, when compared to stock or competing aftermarket models.  The round, curving angles of the Techni-Cooler system are better than stock’s square corner design in receiving the most airflow.  Another boost the Techni-Cooler system receives is its streamlined cores unlike the other bar-and-plate cores which hamper airflow.

A great companion to this Banks system would be the Banks Power Single Monster Exhaust System; with these two reliable Banks systems installed, your vehicle will be running cleaner and cooler than ever!  With its free-flowing design, the Monster exhaust lowers tailpipe temperatures and cuts your vehicle’s backpressure.  Like the Techni-Cooler system, the Monster Exhaust was designed and tested using computational fluid dynamics than temperature tested at all levels.

Whether you’re a newcomer when it comes to aftermarket vehicle installation or a seasoned veteran, then you know that Banks has all the necessary and best upgrades for your diesel vehicle.  So if you’re ready to order your own Techni-Cooler or Monster Exhaust than go online at Banks Power Products using the left-hand side search bar or call at 714-848-2170.