Cummins Intake Manifold

There is a wide array of selections for a person when looking for an intake manifold for their Diesel Cummins engine, but no one has a better selection of parts than Banks Power.  So read through this guide for some overview on a couple of Banks’ intake manifolds then checkout the end of the article for website information.

Let’s start with the Banks Power High-Ram Intake Manifold built for the 2005-2007 6.0L Ford Powerstroke; this part will make certain your PowerStroke’s engine is receiving the best airflow from your stock intercooler.  Unlike the stock manifolds that restrict airflow from the intercooler, the High-Ram intake manifold has a larger, more streamlined design ensuring the m0st efficient flow of air.  This system provides a better boost without raising your vehicle’s turbine backpressure.  When tested for efficiency, the High-Ram intake manifold delivered up to 64% in reduction of loss of pressure; in turn leading to an increase of acceleration and an improved fuel economy.  The product is packaged including a 3-1/2″ boost tube with a constant diameter that allows the airflow to pass from the intercooler without any restrictions.

Next up for review is the Banks Power TwinRam Intake Manifold designed for the 1994-1998 5.9L Dodge Cummins with EGR systems.  This products was specially designed to improve your vehicle’s problems with the air intake and internal temperature balance issues.  The TwinRam intake manifold system has a doubled inlet area which helps optimize the distribution of air into the cylinder head and flow the boosted air into all 6 cylinders equally.  This equalization of the air-streams does away with wrong internal temperatures, balances the cylinder air volume and produces a more smooth output.  The TwinRam intake manifold system improves mileage and durability, reduces emissions, and raises the power rating.

The last Banks made intake manifold system we shall review is the Banks Power Monster-Ram Intake Manifold built for the 1998-2002 5.9L Dodge Cummins.  This intake manifold system includes a huge 3 1/2″ boost tube upgrade that will significantly increase your vehicle’s engine airflow.  Designed using the newest electronic computational fluid-dynamic technology, this intake manifold will give you the most power possible.  With 6 ports that can be used for the injection of such things as: nitrous, propane, meth, or water, there is no limit to this system’s expandability of performance.

With such a large selection of varying intake manifolds (and those i didn’t have room to discuss) anyone can find the right product they need.  If you need to do a little more research of your own before you order a Banks intake manifold then be sure to go online at Banks Power Products using the search bar located at the left-hand side of the screen or call at 714-848-2170.

Advertisements

Banks Exhaust System

If you’ve recently taken an interest in upgrading your car by installing aftermarket parts than have I got the company for you.  They’re called Bank Power and they have to best deals on quality aftermarket diesel parts.  A vital system you’ll want to replace is your vehicle’s exhaust system, so let’s say that you’re going for the ultimate towing package for your 2003-2004 5.9L Dodge Cummins diesel pickup truck with a crew cab/long bed configuration without a catalytic converter equipped.  Well the best exhaust system you could find would  be the Banks Power Dual Exhaust PowerPack System, the best engineered power system for both work and towing applications.  This package comes fully equipped with intake, turbo, exhaust, fuel tuning, and intercooling upgrades for your Cummins engine.

This system allows for a boost in power including an addition of 100 horsepower and 235 rear wheel torque.  To control this boost of power levels comes the Banks iQ, a handy little device with huge amounts of potential.  With its large 5″ touchscreen monitor, this dashboard PC allows quick and easy adjustment of your vehicle’s systems.  With the intake, exhaust, tuner, intercooler, muffler, actuator systems included, you’d be hard pressed to find a better deal for your diesel upgrades.

But let’s say you’re just looking for an exhaust system and you already have all the other necessary upgrades, then you should check out the Banks Power Dual Monster Exhaust System.  With its nice sounding, open, and free-flowing design, this exhaust system is ideal for the 2007-2009 6.7L Dodge Cummins pickup with any cab or bed configuration.  This system is split with single tips at each end, but if you’re not into the cosmetic side of these exhaust systems then you can also pick-up a single exit version.  This system will cut your vehicle’s backpressure, improve its airflow significantly, and safely clears the shocks, spare tire, and brake lines.

Another exhaust system offered by Banks is the Banks Power Single Monster Exhaust System built to upgrade a 2011 6.7L Ford Powerstroke pickup with a crew cab, short or long bed configuration.  This particular design is for the single exit exhaust but like the previous model, it comes in two variations including the dual exit exhaust system.  These parts are constructed with 4″ diameter stainless-steel Diesel Particulate Filter-backed system that has constant-diameter tailpipes and intermediate pipes.  Designed with the exclusive CoolCuff method, the tailpipe’s temperatures are lower than stock; increasing the flow and negating backpressure.

So no matter what kind of diesel vehicle you have, Banks Power has the right part for your situation at great deals.  So go ahead and do some more research or make a purchase if you’re ready, online at Banks Power Products using the left-hand side search bar or by calling 714-848-2170.

Diesel Intake Manifold

If you find yourself looking to improve your vehicle’s internal temperature balance and it’s air intake then you should try out Banks Power TwinRam Intake Manifold made for 1994-1998 5.9L Dodge Cummins.  The product described here was designed specifically for an EGR system equipped engine.  The TwinRam Intake Manifold comes equipped with a doubled inlet area, optimizing the distribution of air to the cylinder head, and flowing the boosted air equally to all six cylinders.  This system of equally proportioned air gets rid of lopsided internal temperatures, as well as balancing the cylinder air volume and producing a smoother output.  This greater amount of air into the chambers boosts your vehicle’s power rating, improves your durability and mileage, and reduces the emissions from your vehicle.

Another system ideal for making certain the air flowing through to your engine is doing so efficiently, would be the Banks Power High-Ram Intake Manifold built for the 2005-2007 6.0L Ford Powerstroke.  If you’ve been relying on your vehicle’s stock intake manifold then it sure isn’t performing at the highest capacity.  The stock design is cramped and angular, restricting the airflow; but thanks to the larger more streamlined High-Ram, your vehicle is going to be getting a greater flow oxygen-rich air into its cylinders.  The High-Ram will help improve your vehicle’s acceleration, its fuel economy, and delivers up to a 64% reduction in pressure loss.

Let’s say you’re looking for parts to enhance your vehicle’s racing capabilities, if so, then Banks has got the thing for you too.  The Banks Power Big Hoss Intake Manifold System for the 2003-2007 5.9L Dodge Cummins is designed specifically for Racing and requires modification to your vehicle’s hood to be installed.  Providing a tremendous amount of airflow, as well as creating a uniform distribution of that air, your vehicle will experience more available power at any boost level.  A great upgrade to this system is the optional Banks Power Boost Tube built to combine with your Big Hoss Intake Manifold System.  The Boost Tube helps the air flow more efficiently to the intake manifold by replacing the usually flat sections of tubing that come with stock models with a larger and better routed tubing.

Clearly Banks has got you covered when it comes down to selecting the perfect intake manifold for your vehicle, with such a wide variety I described here and there’s more that i didn’t have room to discuss!  If you find yourself interested in trying one out for yourself you can order one online at Banks Power Products using the search bar located at the left side of the screen or call the number 714-848-2170.